Перейти к публикации

Maintenance skills of diamond saw blades


wanlongmachines
 Поделиться

Рекомендованные сообщения

    Diamond saw blade is a cutting tool, which is widely used in the processing of hard and brittle materials such as concrete, refractory materials, stone, and ceramics.

    Diamond saw blades have high hardness and high strength, and their manufacturing costs are also very high. The main reason is that the price of diamond blades is expensive. Second, the material requirements of the saw blade substrate are high, so the high manufacturing cost leads to the high price of diamond saw blades. .

    However, precisely because of the sharp and durable characteristics of diamond saw blades, as diamond saw blade manufacturing technology becomes more and more mature, it is more and more recognized and accepted by consumers. Consumers using diamond saw blades are also increasing. However, workers in many companies only know to use diamond saw blades, and do not pay attention to the maintenance of diamond saw blades, and some even know nothing about the maintenance methods of diamond saw blades, which leads to a significant reduction in the service life of diamond saw blades and can no longer perform. Its sharp, durable and cost-effective. Next, Luzhou Sifeng Tools will share with you the maintenance methods of diamond saw blades after use.

    How to maintain the diamond saw blade?

    1. If the diamond saw blade is not used immediately, it should be placed flat or hung by the inner hole. No other objects or footsteps should be stacked on the flat diamond saw blade, and attention should be paid to moisture and rust prevention.

    2. When the diamond saw blade is no longer sharp and the cutting surface is rough, it must be removed from the saw table in time and sent to the diamond saw blade manufacturer for re-grinding (Kuu Wushuang diamond saw blades can be re-ground 4-8 times, (The longest service life is up to 4000 hours or more). Diamond saw blades are high-speed cutting tools, and their requirements for dynamic balance are quite high. Please do not give diamond saw blades to non-professional manufacturers for grinding. balance.

    3. The inner diameter correction and positioning hole processing of the diamond saw blade must be carried out by the manufacturer. If the processing is not good, the product use effect will be affected, and danger may occur. In principle, the hole reaming should not exceed the original diameter of 20mm, so as not to affect the balance of stress.

 

Ссылка на комментарий
Поделиться на других сайтах

Создайте аккаунт или войдите в него для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта. Это просто!

Зарегистрировать аккаунт

Войти

Уже зарегистрированы? Войдите здесь.

Войти сейчас
 Поделиться

  • Сейчас на странице   0 пользователей

    • Нет пользователей, просматривающих эту страницу.
×
×
  • Создать...